The Samsung Dishwasher Error Code OC Indicates to the Over-level Water Error. It’s an indication that there is more water in the dishwasher than there should be. It is closely related to the drain issue. There are lots of errors, and it is one of them. It’s also known as OE, and all these errors mean that the dishwasher is not draining correctly. These problems can be seen in the delicate light flashing. This problem can be solved by yourself. To solve this problem, you can firstly close the water supply valve and switch off the circuit breaker. If the issue remains the same, then call the Samsung authorized service center.
How to Solve Samsung Dishwasher Error Code OC
There are many reasons for OC error. It can be due to clogged drain hose, mesh filter, or drain pump. Let’s check each component below.
Reasons for OC error code
There are many reasons for this error code and can be solved with little guidance. There are two common features of a faulty water level, defective water level sensor or clogged drain hose. If the problem remains the same, then we suggest you take the help of a professional repair person. There may be many reasons for this Samsung dishwasher error code OC.
Some of these are, while the machine being off, then also water is filling up by a little even, which means the inlet valve is not keeping water pressure, and it is not fully closed. So to solve this problem, replace the inlet valve. Now, the next thing you have to do is to check the water level sensor. So, you have to make sure that the hose connected to the sensor is attached correctly. It is not separated from the sensor and the drum at the bottom.
If the leakage switch is ON for 2 seconds and the error will not occur in any state, either switch is ON or OFF state. However, if the door is closed, the washer will automatically drain away from the water when it happens the leakage on off-state. But this error can also be occurring due to some other factors:
Check drain hose for kinks or clogs
If you’ve plugged in your dishwasher, but it still isn’t draining, you may have a clogged drain hose kink. You need to check the connection of the drain hose to the sink. Ensure that it is not kinked anywhere. If you are using the garbage disposal, ensure that when cleaning the dishwasher, the garbage disposal cap is not there.
If you have recently moved the dishwasher, then the drain hose may get kinked or clogged. If you see any bent, then straighten the pipe. In some cases, you may have to remove the drain hose and clean it using a vacuum cleaner to remove any clogged food particles. Also, please note that if you observe that drain hose is faulty, then we suggest replacing it.
If you have been experiencing a slow draining of your dishwasher, then it could be the faulty valve. The dishwasher’s valve could be very old. This is the case because it can corrode easily, and when it does this, it causes the dishwasher to stop working. When this happens, it makes the water in the dishwasher evaporate faster, which means that it will not be able to wash all the food and dishes that you need to. Since it is very difficult to keep a dishwasher running when it is stopped due to this reason, you should, therefore, try to check the valve for signs of corrosion.
The next time you use your dishwasher, you should ensure that the valve is not wet. Water dripping on the valve may mean that the valve is dirty or corroded. However, there are other possible reasons for this. For example, you may not have cleaned the valve well enough, or you may have attached to the Inlet valve to the wrong valve cover.
Therefore, if you are facing a Samsung Dishwasher Error Code OC, it could be the fault of the faulty valve. You should ensure that you clean the valve properly because it will erode even more if not.
Please try to clean the clogged drainage valve. If cleaning does not solve the problem, then we recommend replacing it as the valve will be faulty.
Drain Filter is clogged
You will also need to check the drain filter. It may be faulty or clogged. You can locate it under the Samsung dishwasher’s bottom rack.
You need to remove the bottom rack to get access to the drain filter. Twist it counter-clockwise to remove it. Now rinse it under running water and clean it properly. Place the drain filter back.
Check Drain Pump
The drain pump in your dishwasher moves the dishwasher contents into your sink or garbage disposal. You must pay close attention to the drain pump of your dishwasher because if it fails or malfunctions, you could be faced with the Samsung Dishwasher Not Drying error code. I will display the Samsung Dishwasher Error Code OC.
The first thing you want to do is check the drain lines on the bottom of your Samsung dishwasher to see if they are clear. If there is a grease build-up or other blockage that prevents the drain pump from working correctly, it will drain into the sink and then back into the drain.
The second thing you want to do is make sure that the clogged impeller is clean and there is no clogging. A clogged impeller can be caused by a build-up of food debris such as hair, soap, or dust, as well as any debris that has accumulated in the machine.
You can also test the pump using a multimeter. Do the continuity test, and if the motor fails this test, then we recommend replacing it with a new one. Please remember that if you are not an expert, then always take the help of a professional.
We hope that we have now solved the Samsung Dishwasher Error Code OC. We have also given the solution for Error Code LE on our website. Please check it out as well.