The Samsung Dishwasher Error Code 5E Indicates to the DRAIN Error. It means that the Dishwasher is not draining water, and there is kinked or bent drain hose. The 5E error usually occurs when the dishwasher tries to drain the water after the wash cycle but cannot do so. The tray may become overfill with water, and there is also a chance that it may enter the critical components of the dishwasher.
The 5E error usually occurs when the dishwasher tries to drain the water after the wash cycle but cannot do so. The tray may become overfill with water, and there is also a chance that it may enter the critical components of the dishwasher. If you observe that the bottom pan is empty, then it may be only a temporary problem. So what you can do is to follow the below steps:
- Disconnect the dishwasher from the power supply.
- Wait for 15 to 20 minutes.
- Restart the Samsung dishwasher again.
In most cases, it will solve the problem. If you are still getting the Samsung Dishwasher Error Code 5E, then you have to check other components such as drain hose, mesh filter, etc.
How To Solve Samsung Dishwasher Error Code 5E
To solve the 5E error, you need to identify the issue. Let’s see how to do it.
Reasons for 5E problem
There are only two main reasons that can cause the error problem 5E in the Samsung dishwasher. The first issue is the decrease in the dishwasher’s water flow, which is also called clogging. And the second problem is the malfunctioning of the internal components, or they may not be providing you with the proper function.
Blocking of the drain hose
This problem can also be caused when the drain hose in the dishwasher gets frozen, bent, kinked, or food particles stuck inside it. When your Samsung dishwasher has an error code of 5E, a sound is made by your device to indicate that there is an error. The control panel usually makes this sound, so it is essential to make sure that the drain hose is not deformed to bring such failure.
To Fix the Problem, You can remove the drain hose from the Samsung Dishwasher. Now, connect it to the Tap and see if the water is coming through it without any disruption. If there is no water coming or the water is very slow, clean it and remove any food particles inside it. You can also connect the drain hose to a vacuum for faster cleaning.
If you observe that the hose is broken or faulty, then we suggest you get a new tube and replace the old one.
Clogging of the filter
There are many possibilities that the filter can be clogged due to the garbage or the discarded food materials that often owners forget to clean before putting in the dishwasher.
So, it is equally important to clean the mesh filter, which is located in the lower part of the Samsung dishwasher, so that to prevent any possible error. Please put the filter under the tap and rinse it under running water to clean it properly. If the mesh filter is not working, then replace it with a new one.
The drain pump may be faulty
The 5E error code can also be caused due to the stuck, broken plates, food wastage, and all the other debris in the pump, which makes it impossible for your Samsung dishwasher to let the water leave your device. You can make your device to work properly by unscrewing the mount of the pump, only it is possible and then removes it and get rid of the clogging. You can check the working of your device by checking the rotation of the impeller with the help of a pencil. Remove any clogging and restart the dishwasher.
Check the Drain Pump Connection
The 5E error code in your Samsung dishwasher can also be due to the breakage of the drain pump. You have to make sure that the coil of the drain assembly is conductive. Before measuring the resistance, you need to remove the connector and make sure that your device’s regular reading is only 25 ohm. In case the reading is more than 25 ohm, then the result can be the opposite, and your device may deteriorate, which ultimately causes the Samsung Dishwasher Error Code 5E. It also gets displayed on the screen.
Sometimes, it is also possible that the motor of your device is working correctly, but the impeller may not be rotating. So, you can solve this problem by doing a step, which is to replace the pump.
Broken or Faulty Wiring Connection
It is important to keep in mind that, before installing the device, you have to make sure that all the wires and the electrical circuit are connected properly to the control unit. It is possible that connection is broken or damaged and cannot send a signal of draining the water from the control board to the pump itself. So the water remains as it is in the overfull tray of your Samsung dishwasher causing an error called the 5E error code.
If your Samsung dishwasher is out of electricity, try plugging it into the wall so that it can turn on and off automatically when the power goes out. This will avoid the need to use the main control panel to turn the appliance on and off. Some of the Samsung dishwashers also have a control panel that you can use when there is a power outage.
The Samsung Dishwasher error code 5E is also connected to the main DC power supply unit (PBA) connector of the back of the dishwasher. The PBA connector is usually used by consumers, while the CN1 connector is most commonly connected to Samsung dishwashers used by professional service technicians. Samsung usually uses the PBA connector, but if your dishwasher has the error code 5E, you should check whether it uses the PBA connector or the CN1 connector.
Before you begin to repair your dishwasher, make sure that you have removed the power cord from the backside of the appliance. Start by unplugging the outlet from the back of the appliance and plug it again, so that it can turn automatically when the power goes out. Most of the Samsung dishwashers have a control panel that you can use to fix the dishwasher error code 5E.voltage, or else the water’s strengthening may cause the 5E error.
Faulty Pressure Switch
The Dishwasher error code 5E occurs due to the dishwasher not draining properly due to a stuck float switch inside your dishwasher. Most of the time, this is caused by the incorrect installation of the dishwasher or old dishwashers. It is essential to always check your dishwasher for any damages as well as possible damages to the water pump.
You should also check the pressure switch inside your dishwasher to make sure it is not defective due to having a faulty switch, while the fixing of the problem is still in process. Once you have identified that the stuck float switch is the cause of the malfunctioning of your dishwasher, the next step would be to check the connection. The stuck float switch has a pressure line connecting it to the pump, which could eventually lead to failure in the pump. If you can fix the defective float switch and the pump is functioning properly, the next step would be to start the draining of the dishwasher.
How to fix the 5E error problem
- First of all, you need to clean the drain filter switches located in the lower part of your dishwasher.
- Check if the drain hose is not bent, kinked, clogged, which is just located behind your Samsung dishwasher.
- You have to make sure that the drain hose is properly installed so that it can easily reach the standpipe.
- Check if the drain pump is working properly and is not blocked by any obstacle, and getting enough amount of power is needed.
We hope that we have now solved the Samsung Dishwasher Error Code 5E. We have also given the solution for Error Code 4C on our website. Please check it out as well.