The LG Washer Error Code E6 Indicates to the Overheating Error. It means that the washer motor has become overheated, and you need to wait until it cools down. Also, if an object such as a paper clip or coin stuck between the pulsator and the washer drum, you will get the E6 error.
This error is very frustrating as the washer will not spin at all, and you will not be able to select and start the wash cycle. Here we will give you a solution for the error code E6.
How To Solve LG Washer Error Code E6
The Error Code E6 is a very common error, which occurs in LG top-loading washing machines. The error can halt the operation of the machine. It can also happen that you don’t get the error all the time. If you observe that when you start the cycle, it loads the sense for a while, spins the tub, but the agitator does not move. And you get LG Washer Error Code E6 error. If this happens once a while, you should start probing. Even if just selected programs are affected, you should take this error seriously; because it can potentially stop the operation completely. Certainly, you don’t want to wait for that moment when you have to change the board or engine. Early detection of the problem is key here to avoid any serious damage.
But the good thing about this so-called LG Washer Error Code E6 is that it can be figured out at home, and fixed. If you have the knack to play around electronic equipment, you certainly don’t need professional intervention to fix this error.
Causes
The error usually denotes a temperature increase in the motor of the washing machine. The causes could any one of the following or both.
- Excess heat is being generated in the engine; or
- Some object is preventing the drum from spinning
The LG Washer Error Code E6 does not denote anything beyond these reasons. That’s why it is easy to fix it at home because the subset of the causes becomes too small. But, still, you cannot write off the importance of early probing and fixing. Once you get the error, you should look for underlying reasons and fix it.
What to Check
Before you start looking for the problem and consider fixing. There is a basic checkbox that you need to tick. To start, do the following:
- Empty the washer by taking out all the clothes; nothing should be left in the washer’s container.
- Search for the seam between pulsator and the drum.
- Take a torch or any flashlight and inspect the bottom, see if there is any damage.
If you don’t find anything, you can move ahead to inspect LG Washer Error Code E6. But always keep in mind, you do skip steps, you directly go on to change the board without actually finding the reason, it will not help. Take one step at a time and in the order given below.
How to fix the E6 error?
Before you move ahead with fixing it, make sure the alarm is not false. This has been observed that at times machine generates a false alarm and shows LG Washer Error Code E6error. To be certain of the error is genuine or not; just unplug the cord, leave it for 10 minutes, and restart the machine. If the problem persists, meaning you’re getting the right alarm. And, now you can move ahead to inspect further;
- Inspecting the tank: At times, when a foreign object gets stuck in the tank, it blocks the drum. And the drum doesn’t rotate at all. You need to inspect the tank carefully, to make sure there is no item jammed inside it. Inspect all the water openings, and the clearance the bottom. It has been observed that objects like hairpin, clips, buttons, and Invisibles get stuck at clearance, which leads to the generation of LG Washer Error Code E6. Check overheating: The overheating of the motor can also trigger the error. To check to overheat, just shut down the machine and wait for at least one hour. When the engine is cooled off, then give it a test run. If the has any connection to overheating, the error will certainly disappear.
Tackling technicalities
If the tricks, as mentioned above, do not work, you need to get into the technicality of it. This can also be done at home without any professional help. No prior expertise or experience of fixing appliances required to check this LG Washer Error Code E6. All you need to do is to follow the process, just keep inspecting the parts, until you unravel the reason triggering the error.
Wiring
The error could also be a product of poor transmissions of signals. The transmission gets affected when the electric circuit gets violated for some reason. To fix this, twist, turn and insulate damaged wires, and insert the terminal as firmly as you can, directly into the groove.
Control Module
If the control module has suffered any damages, it can also cause the LG Washer Error Code E6. The underlying reason could be the moisture, which has crept in and triggered the circuit’s failure. Check the engine’s temperature if it is running at the normal temperature at which it usually operates. Just solder the tracks and change the problem controller with a new one. If it still does not work, you may need to change the whole control unit.
Engine
If the situation arises, when you are required to change the engine itself, then you will have a call to make. The call is between going for the replacement of the engine and buying a new machine. If your machine is old and if you think the body and other parts may also be on the verge. Then, you should ideally go for buying new. The reasoning is simple: the engine’s cost is very high; if you invest a little more, you can get the new machine home. At the same time, if your machine is reasonably new, then it’s justified to replace the engine to fix LG Washer Error Code E6.
The odds are very low that you have to change the engine. Mostly, when this error is triggered, the engine is not affected. Surely, the error displays the halt of the operation. But more often than not, you won’t have to change the engine.
We hope that we have now solved the LG Washer Error Code E6. We have also given the solution for Error Code FE on our website. Please check it out as well.