Samsung dryers are known for their reliability and durability, but like any household appliance, they can occasionally experience problems. One common issue that many Samsung dryer owners may encounter is when their dryer is not heating up.
This can be a frustrating and inconvenient problem, as it prevents the dryer from effectively drying clothes. If you’re experiencing this issue, you may be wondering what could be causing it and what steps you can take to fix it.
In this guide, we will discuss some of the common causes of a Samsung dryer not heating up, as well as some troubleshooting steps you can take to resolve the issue.
By understanding the underlying causes and taking the appropriate steps to fix them, you’ll be able to get your Samsung dryer working properly again in no time.
When a Samsung dryer is not heating up, it can be a frustrating and inconvenient problem, but understanding the potential causes of this issue can help you troubleshoot and fix it.
The most common reason for a Samsung dryer not heating up is a burnt heating element, which is responsible for about 80% of cases. Other potential causes for a dryer not heating up include a a bad cycling thermostat, blown thermal fuse, or a failed control board heater relay, which account for about 18% of cases. The remaining 2% of cases are caused by improper power supply.
It is crucial to check these components when your Samsung dryer is not heating up, as it will help you to identify and fix the problem quickly.
Causes And Solution
Burnt Heating Element
A common cause for a Samsung Dryer not heating up is a burnt-out heating element. This can be identified by the presence of either no heat or only low levels of heat in the dryer when running it normally.
The heating element functions as an induction coil that creates heated air to facilitate drying clothes and other fabrics, so if this part fails, then you’ll need to replace it with a new one.
Evidence suggests that replacing the burnt out heater element could potentially restore your dryer’s normal function and prevent further damage from occurring due to a lack of proper airflow within its system.
Furthermore, regularly servicing your dryer’s coils and elements may help maintain their overall condition which will reduce the chances of them burning out prematurely due to over usage or extreme temperatures during operation.
Why It Fails
The most common reason why a heating element may fail in a Samsung dryer is due to the accumulation of lint and other debris on its coils.
This build up restricts air flow within the appliance which can cause overheating, thus leading to premature failure of the component.
In addition, circuit boards that control power supply to these elements can also malfunction or become damaged over time due to excessive vibrations or wear-and-tear from use.
A blocked vent or excessively clogged lint filter will cause a heating element failure in Samsung dryers. When this happens, hot air is not able to circulate properly inside the machine, leading to an overheated motor or other components that eventually cause the heater to burn out.
How To Fix
When your Samsung dryer suddenly stops heating up, it could be due to a burnt out heating element.
You will need to inspect the dryer visually and test it using a multimeter to determine if this is indeed the cause of the problem.
The first step in troubleshooting is to open up the back panel of your Samsung dryer and take a look at the heating element. If you see any signs of burning or damage, it can indicate that your heating element has burned out and needs to be replaced.
If this is not immediately visible, you will then need to use a multimeter to check each part of the circuit for continuity.
This will tell you whether or not power is flowing properly through all components, including the heating element itself.
When the heating element in your Samsung dryer fails, you will need to replace it. Although it may be tempting to try and fix the problem yourself, it is important to exercise caution and safety first.
The following steps will help guide you through the process of replacing a broken or damaged heating element in your Samsung dryer.
To begin, you will want to start by unplugging your dryer from its power source and removing both the top and side panels of the machine.
This should give you access to all working components, including the thermostats, fuses, and heating element.
Carefully inspect each component with a multimeter check for continuity before moving on – this can help identify any further issues that need addressing before replacing the heating element itself.
If continuity is not found for any of these parts then they too should be replaced as necessary.
Blown Thermal Fuse
A thermal fuse is an important safety device found in Samsung dryers. It works to protect the dryer from overheating, which can cause major damage to its components and even potentially result in a fire.
The thermal fuse is designed to shut off the power supply when it detects excessive heat within the appliance, and as such, it is imperative that it functions properly for your safety.
Why It Fails
Blown thermal fuses are a common issue with Samsung dryers.
When the fuse blows, it’s usually due to a buildup of lint in the lint filter, a clogged dryer vent, or inadequate airflow.
Knowing why thermal fuses fail can help you eliminate potential causes and keep your dryer running more reliably.
When the lint filter is not cleaned regularly, this can cause excessive heat to build up in the unit, leading to premature failure of the thermal fuse. The same thing happens when there are blockages in the air ducts or vents that don’t allow good air flow through them.
This restricts cool air from entering your machine and forces hot air to remain inside which builds up pressure and ultimately blows out the fuse.
How To Fix It
. One of the first things you should do is check your user manual for instructions on how to replace the burnt heating element. This will help provide guidance on what tools and parts you may need.
The next step is to replace the thermal fuse located near the heating element as it regulates power flow and may have been damaged when the heating element malfunctioned.
In order to do this, start by unplugging or turning off all power sources connected to your dryer, then locate and remove any screws securing access panels so you can get to the thermal fuse easier if needed.
Once you have access to the thermal fuse, disconnect and remove it from the dryer.
Replace the old thermal fuse with a new one of the same amperage rating, then reconnect and secure any panels or screws that were removed.
Blocked Vent
When your Samsung dryer isn’t heating up, it can be a huge inconvenience. There are several possible causes for this issue, and one of the most common is a blocked vent. A blocked vent prevents heated air from circulating properly in the dryer and can cause the appliance to fail to heat up at all. Knowing what causes this issue and how to fix it can help you get your Samsung dryer working again in no time.
Why It Fails
If your Samsung dryer isn’t heating up, the first thing you should check is the venting system.
Over time, lint or other debris can build up inside these vents and block them off completely.
This blocks off airflow so that warm air cannot circulate correctly within the appliance; as a result, it won’t heat up properly or at all.
How To Fix It
First, unplug your Samsung dryer from its power source before beginning any maintenance work.
Once unplugged, you’ll need to locate the exhaust vent hose at the back of the unit and inspect it for signs of clogging. If necessary, use a vacuum cleaner with an extension nozzle to remove loose lint or debris from inside the hose.
To ensure all blockages are cleared away completely, make sure to check both ends of the vent hose for obstructions too.
Failed Control Board Heater Relay
Control board heater relays are an integral part of a Samsung dryer’s operation. Located on the main control board, these components are responsible for controlling heat within the appliance.
The relay switches power from the thermal fuse to the heating element, controlling the temperature of air entering into and leaving from the dryer drum.
It is important that these relays be functioning properly in order to ensure safety and optimal performance of your Samsung dryer.
Why It Fails
The answer lies in the design of Samsung’s control boards.
Many times, heat from adjacent components or increased voltage will cause a component on the control board to become overheated and malfunction.
Additionally, faulty wiring or corrosion can cause an improper connection between the relay and other parts of the appliance leading to failure as well.
How To Fix It
Fixing and replacing a control board heater relay in a Samsung dryer is relatively easy to do without spending too much money, especially if you are comfortable working with mechanical parts.
First, assess the situation by taking note of any odd noises coming from your dryer while it is running or after it has completed its cycle. You can also open up the back panel on your machine and check for any visible signs of damage or corrosion on the control board itself.
Once you have determined that there is indeed an issue needing repair, then begin by disconnecting power to your appliance before proceeding further as safety precaution.
Next, remove the back panel on your dryer. Then, remove the screws that hold the front control panel in place and disconnect any wires from the board.
You will then need to remove the control board from its housing. Once you have done this you can begin to inspect the board for any signs of damage.
If the control board has suffered from physical damage, then you will need to replace it.
The control board can be purchased from your local appliance parts store and replaced in a few simple steps.
Defective Cycling Thermostat
A cycling thermostat is a key component in a Samsung dryer. This device is responsible for controlling the temperature of the appliance and making sure that it operates safely and efficiently.
It monitors the temperature within the dryer, and if it becomes too high, it will automatically shut off power to prevent any fire or other damage from happening.
The thermostat also works to keep clothes from becoming overly hot while they are drying by regulating when heat is turned on and off during each cycle.
Why It Fails
One of the common issues that can cause cycling thermostats to fail is age.
Over time, wear and tear can lead to corrosion or breakage on certain parts of the component.
This damage can prevent them from correctly regulating the temperature in a dryer which causes them to fail prematurely.
Another reason why cycling thermostats fail is due to improper installation or maintenance.
How To Fix It
To fix a faulty cycling thermostat, you can replace it with a new one.
Here are the steps to replace a cycling thermostat in a Samsung dryer:
- Unplug the dryer from the power source.
- Locate the cycling thermostat. It is usually located on the blower housing or the back of the dryer.
- Remove the thermostat by carefully disconnecting the wires from the terminals.
- Take note of the wire placement and connections before disconnecting them.
- Install the new cycling thermostat in the same location and connect the wires to the corresponding terminals.
- Test the dryer to ensure that it is heating up correctly.
It’s worth noting that replacing a cycling thermostat can be a bit tricky and requires some technical knowledge, If you’re not confident in your ability to do the repair, it’s best to contact a professional or seek help from the manufacturer.
Power Supply Problem
A dryer is a power-intensive appliance, particularly when it comes to the heating element.
To produce heat, the heating element inside the dryer requires a steady two-phase 240V power supply.
However, in some cases, the power supply may not be sufficient, causing the dryer to not heat up.
Why It Fails
This issue is often caused by a tripped circuit breaker.
The dryer may be connected to double circuit breakers, and if one of them trips, the dryer will only receive half the power it needs (i.e. 120V) from one phase.
This means that other parts of the dryer such as the motor or control board may still receive power and function correctly, but the heating element will not receive power and therefore can’t generate any heat.
How To Fix It
To fix this problem, you must restore full power to your Samsung dryer.
Check your circuit breakers and identify which ones power your dryer.
Ensure that both of them are switched back on. If the same breaker keeps tripping, that’s a sign that there’s a significant issue with your electrical system, and you’ll need to refer to a professional electrician to troubleshoot the problem.
If the issue lies within the Samsung dryer itself, you’ll need to contact a dryer repair technician.
It’s also important to note that tripped circuit breaker is not the only reason for the dryer not getting enough power.
It could be also due to overloading of the circuit or a loose electrical connection, so it’s always a good idea to check these as well before calling a repair technician.
Leave a Reply