The Samsung Dishwasher Error Code 4C Indicates to the Water Supply Problem. This error code usually occurs when the dishwasher is unable to take enough water to clean the dishes, and is unable to start the cycle. In place of checking your devices, it is essential to keep an eye on the plumbing of your house and check if everything is ok.
This error can also occur due to the shutting down of the tap that supplies the water, or the pressure of the supply of water is too high for too low. The 4C error can also occur due to the malfunctioning of the control unit or due to failure in the water pipe.
How To Fix Samsung Dishwasher Error Code 4C
Many reasons can cause the error problem 4C in the Samsung dishwasher. Let’s look at them.
Reasons for 4C problem
Many reasons can cause the error problem 4C in the Samsung dishwasher. If you have already checked that the plumbing of your device is working correctly and the control unit is still facing any problem, then this error is the 4C error code. But again, this error can also be caused by some other factors:
Fault in the water supply hose
First of all, you need to check if the water supply hose is properly connected to the water pipe. It would be best if you made sure that the water pipe is in proper condition and has no bends and kinks in the water hose. To check if the mesh filter is blocked or not, you only need to do is that detached the water hose from the dishwasher and keep the free end of it in the container which is empty and in the end open the tap, it will be visible to you if the mesh filter is cleared or not. If the water flow is not continuous, there is clogging, and you need to rinse it off by the steady flow of water or merely the water jet. The filter can become clogged due to the garbage and the food that has stuck inside the mesh filter. The reason behind the clogging is that the owner of the device sometimes used to forget to rinse the dishes without putting them back into their Samsung dishwasher. So, it is equally important to clean the mesh(You can locate it at the bottom of the dishwasher) to prevent any possible error.
Check Drain Pump and Impeller
The 4C error code can also be caused by the stacking of the broken plates, food wastage, and all the other debris in the pump, making it impossible for your Samsung dishwasher to let the water leave your device. You can make your device to work properly by unscrewing the mount of the pump, only it is possible and then removes it and get rid of the clogging. You can check the working of your device by impelling the rotation with the help of a pencil.
The water inlet valve is closed
The 4C error code in your Samsung dishwasher can also be caused by the filling up of the dishwasher with an improper amount of water. It may be possible that your device may have accidentally got stuck in the closed position, which ultimately results in the stoppage of the flow of water in the dishwasher.
To avoid this problem, you need to rotate the valve in the clockwise direction and then again turn the valve entirely to open the passage. It will help you in avoiding the 4C error code in your Samsung dishwasher.
Check water supply hose and detergent dispenser
Both the water supply hose and the detergent dispenser are connected with a transparent tube and this error may occur due to the damage or the bent of this tube. It may happen when you are a plant is moving, and the who is a collector of your dishwasher falls out from its place many times. You can help them replace it or remove a to let the free flow of water and prevent your Samsung dishwasher, causing an error called the 4C error code.
Faulty Water Inlet Valve
This error can also occur due to the fault in the electromagnetic coil of the water inlet valve. The valve is nothing but a small part that connects the to water horses with the appliances that you are using. The solenoid valve in your dishwasher is used to control the two threaded ports. When there is a 4C error code in your device, then you need to check the multimeter.
First, you need to gain access to disconnect the valve with the dishwasher you are using when you find that there is a 4C error in it. Then, you need to test each solenoid valve and connect it with the 220 voltage device for the continuity of its working. With the help of the multimeter probe, you need to touch the end of the solenoid valve, and it should show a normal reading of your device for about 2-4 kOhm. If you are still facing the problem in the wall, which is not correctly responding to the current supply, you need to replace the valve, especially the solenoid valve.
How to fix the Samsung Dishwasher Error Code 4C
- First of all, you need to make sure that the water tap connected to the dishwasher is open to full.
- Check if the drain hose is not bent, kinked, clogged.
- You have to make sure that the water hose mesh filter is not blocked, and if there is any clogging, then clean the mesh filter properly from the remaining food or any other impurities.
- Check if the drain pump is working properly, is not blocked by any obstacle, and enough power is needed. And it would be best if you also made sure that the water supply hose is not kinked or bent.
We hope that we have now solved the Samsung Dishwasher Error Code 4C. We have also given the solution for Error Code OE on our website. Please check it out as well.