The Frigidaire Dishwasher Error Code ER indicates to the Membrane Switch Failure. It means that the main control board has found a stuck or broken key in the panel. Also, you will get the ER error if you have pressed it many times. We suggest you replace the broken or stuck key. In some cases, you may have to replace the whole control panel.
How To Fix Frigidaire Dishwasher Error Code ER
The ER error means that there is a touchpad/keypad problem. But, as the dishwasher is made to last long, so sometimes you may get this error for a short time only. You can try to reset the error by doing the following steps.
Reset the ER Code
- Switch OFF the dishwasher.
- Disconnect the water supply.
- Wait for 10-15 minutes.
- Connect the water supply.
- Start the Dishwasher.
In most cases, the ER error will go away. If you still get the issue, you will need to check the keypad and control module.
Check the Keypad
You need to check if your keypad is working correctly or not. You need to turn OFF the dishwasher and use a screwdriver to remove the screws from the control panel. Remove the control panels and door panel. You will now have access to the keypad assembly. It will have several wires connected to it.
You can use a rubber or some soft object to clean the surface of the wire connection. Many times it will solve the Frigidaire Dishwasher Error Code ER. It’s also cheap and easy to do it.
If it does not solve the problem, then you may have to buy a new keypad and replace the old one with a new one. We also suggest you take the photo of wirings so that it will be easy to reconnect all the wires again.
We hope that we can solve your problem. We have also given the solution for Error Code i30 on our website. Please check it out as well.