Bosch Dishwasher Error Code E14

Are you getting the Bosch Dishwasher Error Code E14? Then you have arrived at the right place, as we have given the complete solution on how to fix this error. So, Why is Your Dishwasher displaying the E14 Error? This error usually means that the water flow meter is faulty, or your dishwasher is getting too much or too little water.

Many new Bosch dishwashers come with running water heater features. What this heater do is to take the cold water and tun it through in a loop till the water temperature becomes 65-degree Celsius or to the optimum temperature. The amount of water that bosch dishwasher can take is controlled by the flow meter. If the flow meter gets damaged or becomes faulty, then you will get the Error Code E14.

How To Fix Bosch Dishwasher Error Code E14

Bosch dishwasher has a control panel that will display errors and tells us how to fix it, which makes our job easier. When you get the Error Code E14, then it means that the machine is telling you that flow meter is not working properly. The flow meter controls the amount of water going to the water tank. You can find it near the pressure switch, which is situated near the heating element in the dishwasher.

There can be other reasons for Bosch Dishwasher Error Code E14 such as:

• The pressure is either too high or too low that is stopping the water supply.
• Faulty Intake Valve.
• The control panel is burnt or damaged.
• Burnt wire or loose connection.

How To Fix Pressure issue in the Dishwasher

The wrong pressure in the dishwasher can cause it not to work correctly.  To mitigate the pressure issues. Please do the following steps.

• Switch off the power supply.
• Disconnect the Dishwasher.
• Tilt the dishwasher about 15-22 degrees to the left.
• Wait for 15-20 minutes.

If any pressure issues are causing the error code E14, then it will get reset.

If you are still getting the issue, then the next step you need to is to disconnect the hose and check the mesh filter. If it is too dirty, then the dishwasher will not get enough water. Clean it properly under running water. After placing it again, hopefully, now, you will not get the Bosch Dishwasher Error Code E14.

If You still face the issue, then you need to check the water flow meter. If it is damaged, then you need to replace it. Let’s see steps on how to do it.

• Take all safety precautions like wear gloves and goggles.
• Switch off the power supply and remove the power cable.
• Disconnect water hose.

  

• Remove dishwasher from the cabinet.
• Remove the left side panel.
• Take a screwdriver and remove the three screws at the front of the panel.
• Remove one screw at the blank of the panel.
• Now you will be able to see the water tank.
• The flow meter will be in it. It will be connected either by two orange or blue wires.

  

• Check the wires. If it’s broken, then repair it.
• Check the flow meter. If it’s not working correctly, then replace it.
  
• Make sure that you buy the correct model.